Показать сообщение отдельно
Старый 19.03.2010, 20:36   #26
PKozik

Полковник запаса
 
Аватар для PKozik
 
Регистрация: 13.03.2007
Адрес: Екатеринбург
Сообщений: 8,301
Из хелпа этого рамдиска:
Цитата:
Advanced Tab (32-bit OS Only)



You will only see the Advanced tab if (a) you are running a 32-bit version of the Windows OS that is limited to 4GB of system memory, (b) your system has more than 4GB of physical memory installed and (c) your system has Physical Address Extensions enabled and (d) the BIOS on your system support the Windows Management Instrumentation calls that allow Windows to enumerate the physical memory installed on your system (this is true of most modern hardware). Ordinarily RAMDisk requests disk memory from the operating system, much like any other program. This tab can enable a feature of RAMDisk that will allow you to utilize unused memory above the 4GB limit for 32-bit versions of Windows, memory that is not being used by the operating system but is available to your hardware. This feature is not available for 64-bit versions of Windows because they do not have a 4GB memory limitation.

The Advanced tab shows you how much memory RAMDisk has detected above the 4GB limit, which is unused by 32-bit Windows. With RAMDisk you can use this memory instead of Windows system memory, making optimal use of all the memory available to your system! The Advanced tab will show you how much physical memory is available, how much is used by Windows and your system hardware, and how much is potentially available to RAMDisk.

Use Memory above 4GB for RAMDisk: Selecting this option will configure the RAMDisk driver to use memory above 4GB
, leaving all system memory for Windows. The maximum disk size limit will be adjusted to the “Unused RAM Available to RAMDisk” listed on the Advanced tab.

Special Note: RAMDisk cannot detect motherboard resources mapped to addresses above 4GB. Please check your BIOS settings and disable any BIOS mapping of resources above 4GB in memory. If this feature of RAMDisk is enabled and a conflict occurs, this will likely cause Windows to crash when the RAMDisk is initialized. If this occurs, you can still boot Windows in Safe Mode and delete the driver (either RAMDiskXP.sys of RAMDiskVE.sys) from the Windows system directory (typically c:\Windows\systems32\drivers). You will then be able to reboot Windows and reconfigure RAMDisk.
Ищите галочку :)


Полковник запаса / Ветаран запаса
Наша Армия [CCCP] / ICQ#449374061 / ЛД

PKozik вне форума Вверх   Ответить с цитированием